Back to Back Issues Page
Build Your Own Home, Issue #003 -- Fireplace Insert.
December 31, 2004

This month’s newsletter is about Fireplace Inserts.

Hope everybody had a great Christmas. Wow, it is time to say goodbye to old 2004. What happened, it went so fast. Let me first wish you a Happy New Year!

Ok, back to fireplace inserts. When we built our home we wanted to have a fireplace in our great room and our master suite. We really wanted an all stone fireplace in great room and the master suite but found out real quick it was pricey.

My brother has all stone fireplace and in addition to the cost of the mason work he had problems with his foundation from the additional weight. His fireplace and chimney are stone all the way to the top. He wound up having to add support under the foundation after a couple of years when cracking and settling occurred. I don’t need to tell you that foundation repair is expensive.

Taking all this into consideration we decided to install a fireplace insert, or as you may have heard it called a pre-made firebox. In addition to being lighter it is also much more energy efficient.

With the additional savings from a stone fireplace we bought a double-sided fireplace insert. This solved many problems. Not only is it beautiful but it also takes up less space and uses one flue (it is one fireplace it just looks like two).

Both sides of the Fireplace insert are finished with complementary décor to match the room, and if you didn’t know it was one fireplace insert you would swear it was two fireplaces.

The great room side is finished using cultured stone like the outside of the house and the master suite side is finished in marble. The cultured stone also saves on weight and looks wonderful.

Another good tip that I can give you is put in a gas lighter. A gas lighter makes life much easier when you build a fire. Most all of the fireplace inserts have a knock out in the side of the firebox to put a pipe through for the gas lighter. If you do not have natural gas you can hook it up to propane. On one of our houses I used a gas bottle for the lighter because the house was all electric and I had no gas available.

Make sure you at least run the gas line during the install, you can always go back and hook it up later. It is tough to run the pipe once the wall is sealed up. You may even want to install a gas log at a later date; the gas line will come in handy for that also.

One final piece of advice is make certain you follow the curing instruction that come with the fireplace insert. The refractory is green or uncured and needs to be dried out slowly with a few small fires before you really build a big roaring one. My fireplace insert called for three smaller fires and then I could build a big one.

I will post most of this text with some pictures soon on Build Your Own Home just look for the button on the navbar that says fireplace.

We wish you and yours a prosperous and wonderful New Year,

George Stevens

If you want information about Construction Loans or Home Loans go to our Home Loan & Construction Loan Page.

If you want more information about building your own home go to our Building Knowledge Center.

If you want information on hiring qualified contractor go to our Building Contractor Page.

Back to Back Issues Page